Dürkopp Adler 868-M, Operating Instructions Manual

Page: 72 / 168

Operation
70 Operating Instructions 868-M - 01.0 - 12/2020
2. Press the pedal to position -2 at the seam end (

p. 80 ).

The thread is cut off.
3. Remove the sewing material.
Fig. 47: Remaining thread monitor in action (4)
Important
Insert the new bobbin so that the milling groove (3) is facing down.
4. Changing the bobbin (

p. 44 ).

You can start sewing a new seam.
5. Take the remaining thread off the bobbin you removed.
6. If necessary, wind a new hook thread onto the empty bobbin
(

p. 41 ).
(3) - Milling groove
③