Dürkopp Adler 868-M, Operating Instructions Manual

Page: 45 / 168

Operation
Operating Instructions 868-M - 01.0 - 12/2020 43
5. Guide the hook thread counterclockwise around the
pre-tensioner (5).
6. Insert the hook thread through thread guide (2): From the
bottom left to the top and from the top to the bottom.

The last hole is the hole on the far right in the thread
guide (2).
7. Guide the hook thread to the winder (6).
Fig. 25: Winding the hook thread (4)
8. Clamp the hook thread behind the cutter (9) and tear off the
loose end behind it.
9. Fit the empty bobbin onto the bobbin shaft (8).
10. Turn the bobbin clockwise until it clicks.
11. Pull the winder lever (7) up against the bobbin.
12. Switch on the machine.
13. Press the pedal forward to position 1 .

The machine sews and winds the hook thread from the
thread reel onto the bobbin. When the bobbin is filled, the
winding process stops. The winder lever moves back down.
The cutter is automatically moved to its vertical initial position.
14. Remove the full bobbin from the bobbin shaft (8).
15. Tear off the hook thread behind the cutter (9).
You can now fill the next bobbin. You can insert the full bobbin
into the hook.
(7) - Winder lever
(8) - Bobbin shaft (9) - Cutter
⑦
⑨
⑧