Dürkopp Adler 868-M, Operating Instructions Manual

Page: 144 / 168

Troubleshooting
142 Operating Instructions 868-M - 01.0 - 12/2020
10.2.2 Error messages
Code
Error/
warning
Possible cause Remedial action
1000 Error Sewing motor encoder
plug (Sub-D, 9-pin) not
connected • Connect encoder cable
to the control, use
correct connection
1001 Error Sewing motor error:
Sewing motor plug
(AMP) not connected • Check connection and
plug in, if necessary
• Test sewing motor
phases (R= 2.8
Ω
, high
impedance to PE)
• Replace the encoder
• Replace sewing motor
• Replace the control
1002 Error Sewing motor insulation
fault • Check sewing motor
phase and PE for low-
impedance connection
• Replace the encoder
• Replace sewing motor
1004 Error Sewing motor error:
Incorrect sewing motor
direction of rotation • Replace the encoder
• Check plug assignment
and change, if
necessary
• Check wiring in
machine distributor and
change it, if necessary
• Test sewing motor
phases and check for
correct value
1005 Error Sewing motor blocked • Eliminate stiff
movement in the
sewing machine
• Replace the encoder
• Replace sewing motor
1006 Error Maximum speed
exceeded • Replace the encoder
• Perform reset
• Check class (
t 51 04 )
1007 Error Error in the reference run • Replace the encoder
• Eliminate stiff
movement in the
sewing machine