Dürkopp Adler 868-M, Operating Instructions Manual

Page: 95 / 168

Programming
Operating Instructions 868-M - 01.0 - 12/2020 93
5.3 Assigning a function to the knee button
Fig. 62: Assigning a function to the knee button
The knee button (2) can be assigned 2 different functions.
The functions are selected in sewing mode via the position of the
toggle switch (1) (
1 or 0 ).
Information
At the factory, the knee button was assigned the switchable sewing
foot stroke function in push-to-run and hold-to-run mode (

p. 60 ).
The knee button (2) can also be assigned different functions.
To assign a function to the knee button (2):
1. Press the button.
2. Set the toggle switch (1) to the desired position ( 1 or 0 ).
If the toggle switch (1) is, for instance, set to the bottom
position, the new function is saved to the
0 position.
(1) - Toggle switch (2) - Knee button
①
②