Dürkopp Adler 755 B, Operating Instructions Manual

Page: 61 / 374

Operation
Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021 59
4.27.2 Outfeed roller
Fig. 49: Outfeed roller
The transport rollers (1) convey the workpiece into the stacker opening.
• This is necessary for workpieces positioned in the longitudinal
direction
• It is also necessary for workpieces which are too short to be seized
by the throw-over stacker
• Minimum distance: 200 mm from the middle of the pocket opening
to the edge of the workpiece
The setting for the roll-off speed and the duty cycle is made using the
OP7000 control panel.
Program parameters > Stacker/smoother/
blow-off/roll-off
( 
p. 179
)
Information
The outfeed roller serves a dual function:
• Stacker switched on: Outfeed roller as stacker extension during the pro-
duction of jackets
• Outfeed roller as ejector in combination with the bundle clamp during
the production of trousers
4.27.3 Smoother
The smoother keeps the sewn trousers parts from twisting if a bundle
clamp is used during sewing. The sewn trousers parts are thus positioned
straight and neatly in the bundle.
(1) - Transport rollers
①