Dürkopp Adler 755 B, Operating Instructions Manual

Page: 228 / 374

Programming
226 Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
The following table lists the items that can be set in the
Test stepper
motor
menu:
2. Press the desired button.
3. Enter the desired value using the numeric keypad.
4. Confirm with
OK .
Information
When the transport clamps are moved, the
Encoder
and
Position
values
must not deviate from one another by more than 0.2. There is a risk of step
losses if the value changes exceed the permissible limit when the trans-
port clamps are moved.
If there is a difference between the
Encoder
and
Position
values, you can
reset the values by carrying out a reference run.
Symbol Meaning
Adjust clamp speed
• 10% - 100%
Adjust stepper motor pos. 1
• 0 - 517.5 mm
• Starting position transport clamp
Adjust stepper motor pos. 2
• 0 - 517.5 mm
• End position transport clamp
Transport clamp quick adjustment
Lift transport clamp
OR
Lower transport clamp
• When lowered, the transport clamp must rest on fabric as
the machine will otherwise sustain damage
Switch stepper motor current-free On/Off
• The transport clamp can be moved manually
Reference
Advance transport clamp
•
Caution! Transport clamp moves forward
Return transport clamp
Adjust transport clamp pressure
• 10 - 100%