Dürkopp Adler 755 B, Operating Instructions Manual

Page: 46 / 374

Operation
44 Operating Instructions 755 B, 756 B/F - 00.0 - 02/2021
4.16.3 Setting up single pipe
Fig. 33: Setting up single pipe
To set up single pipe:
1. You switch and set the transport clamps from double pipe to single pipe
(also requires a change of the folder tools!) at the OP7000 control
panel.
Program parameters > Process of transport
clamp > Transport clamp quick adjustment
( 
p. 167
).
2. Position the piping strip at the front or rear stop (3).
3. Position the piping strip at the center stop (4).
4. Start sewing.
(3) - Stops (4) - Center stop
④
③