Dürkopp Adler 567 CLASSIC, Service Manual

Page: 43 / 80

Position of the hook and needle
Service manual 567 classic - 01.0 - 10/2015 41
Fig. 30: Adjusting the needle guard
Setting steps
1. Turn the handwheel and check how far the needle guard (2) pushes the
needle away.
2. Turn the screw (1) such that the needle guard (2) just pushes the
needle (3) far away enough so that it cannot be touched by the hook tip:
• For pushing away more: Turn it counterclockwise
• For pushing away less: Turn it clockwise
11.4 Setting the needle bar height
Order
First check the following settings:
• Loop stroke position (

11.2 Setting the loop stroke position ,
page 38)
• A straight and undamaged needle must be inserted
(

Operating manual section, Inserting and replacing the needle )
Correct setting
Machine locked in place in position 1 (

page 16) and stitch length ad-
justing wheel set to 0.

The hook tip is level with the lower third of the groove for the needle.
(1) - Screw
(2) - Needle guard (3) - Needle
①
③
②
WARNING
Risk of injury.
Risk of crushing injuries and stab wounds from mov-
ing and sharp parts.
Switch off the sewing machine before checking and
setting the needle bar height.