Winder
56
Service manual 567 classic - 01.0 - 10/2015
15.2 Setting the hook thread guide
The position of the hook thread guide determines how the thread is wound
onto the winder.
Correct setting
The thread is wound on evenly over the entire width of the bobbin.
Cover
Arm cover (
3.3.2 Removing and fitting the arm cover
Fig. 47: Setting the hook thread guide
Setting steps
1. Loosen the screw (1).
2. Move the hook thread guide (2):
•
To the front:
The thread will be wound on further to the front
•
To the rear:
The thread will be wound on further to the rear
3. Tighten the screw (1).
①
②
(1) - Screw
(2) - Hook thread guide
Summary of Contents for 567 CLASSIC
Page 1: ...567 classic Service manual...
Page 20: ...Working basis 18 Service manual 567 classic 01 0 10 2015...
Page 79: ......
