DURKOPP ADLER M-TYPE PREMIUM, User Training Manual

Page: 56 / 68

Create a program consisting of several seam sections
• Create the program
P008 COMPLEX PROGRAM
• Section 1:
• stitch length 3.8 mm
• sewing foot stroke 1.5 mm
• needle thread tension 25
• stitch count: number of stitches 12
• Seg.End Mode: Stop active On, Thread
Trim inactive Off, Needle Up inactive Off,
Foot lifted inactive Off
• start tack: active On
• end tack: inactive Off
• Foot lifted:. Off
(foot lift at sewing stop on the seam)
• Section 2:
• stitch length 6 mm
• sewing foot stroke 5 mm
• stitch count: mode 0 (not counted)
• Seg.End Mode: Stop active On,
Thread Trim active On,
Needle Up active On, Foot lifted On
• start tack: inactive Off
• end tack: active On
• Global parameters of program:
• program name: COMPLEX PROGRAM
• FabricThickness: active On
• Stroke: Mode 2.OnOff, ThickMin 3 mm
• stitch lengths: Mode linear,
ThickMin: 2 mm, ThickMax: 5 mm
Exercise: Create a complex Program
56