DURKOPP ADLER M-TYPE PREMIUM, User Training Manual

Page: 48 / 68

Edit Mode: Modify an existing program (cont.)
48
• Modify segment parameters
• Navigate on the desired seam section number and press
• “New” Parameters not shown in manual mode
• StitchCount – predefine the no. of stitches for the section
• Seg.End Modes – Segment End Modes (any adjustment of what
should happen at the end of this seam section)
• Stop On/Off – Sewing stops at the end of the seam section when
switching to the next section.
• Thread Trim – thread cutting at the end of the section
• Needle Up – Needle position at the end of the section
• Foot Lifted – Foot lift at the end of the section
• FL height – Foot lift height
• Backwards – backwards sewn stitches (On/Off)