DURKOPP ADLER M-TYPE PREMIUM, User Training Manual

Page: 52 / 68

Exercise: Edit Mode – Modify program P010
52
1. Select the program P010 – TEST 2 and activate the Edit mode
2. Select seam section 1 (first section) and press OK .
3. Modify the following parameter settings:
• Section 1:
• stitch length 6 mm
• sewing foot stroke 2.5 mm
• thread tension 30
• stitch count : mode 1 (count stitches), number of stitches 10
• Segment End Mode : Stop active On Thread trim inactive Off, Needle Up inactive Off, Foot lifted inactive Off
• start tack: inactive Off
• end tack: inactive Off
• Foot lifted: when sewing stops on the seam: inactive Off
• Section 2:
• stitch length 3 mm
• sewing foot stroke 5 mm
• stitch count: mode 0 (not counted)
• Segment End Mode: Stop active On, Thread trim active On, Needle Up active On, Foot lifted active On
• start tack: inactive Off
• end tack: active On
• Global parameters of program:
• name of the program: TEST TRAINING
• FabricThickness: active On
•
Foot Stroke: Mode 2.OnOff, ThickMin. 3 mm
• stitch lengths: Mode linear, Stitch Length 6mm, ThickMin: 2 mm, ThickMax: 5 mm