DURKOPP ADLER M-TYPE PREMIUM, User Training Manual, Page: 55 / 68

Exercise: Create a Simple Program
55
Create a program consisting of one seam section only
• Create program P007 PROGRAM SIMPLE
• Add a segment
• Set the seam section parameters:
• stitch length 4 mm
• sewing foot stroke 3 mm
• needle thread tension 25
• Seg.End Modes:
Stop active On, Thread trim active On, Needle Up inactive Off, Foot lifted inactive Off
• start tack: active On
• end tack: active On
• Foot lifted: inactive Off
• Adjust the global parameters of the program:
• Program Name: P007 PROGRAM SIMPLE
• Bobbin: Mode Software, counter 500 points, MotorStop active On, ResetNeces active On
• DailyPieces: On, Incr.
• Sew the program (test with material)
• Modify any parameter settings in the edit mode if necessary