DURKOPP ADLER M-TYPE PREMIUM, User Training Manual

Page: 35 / 68

Pre-setting in Manual Mode
• modify the base parameters :
• stitch length 3.8 mm
• thread tension 25%
• sewing foot pressure 5
• sewing foot stroke 3 mm
• modify the other parameters P…
• Thread Trim active On
• Start bartack active (On)
• Number of backward stitches (3 points)
• Number of forward stitches (3 points)
• St.Len.Def – Default stitch length active (On)
• End bartack active (On)
• Number of backward stitches (3 points)
• Number of forward stitches(3 points)
• St.Len.Def – Default stitch length active (On)
• Gap (edge guide): 10 mm
• adjust the auxiliary values:
• 2
nd
stitch length 6.0 mm
• 2
nd
thread tension 30%
• 2
nd
gap (edge guide distance) 20 mm
During Sewing Process
• start sewing
(automatic start bartack)
• activate/deactivate the auxiliary values
activate 2
nd
stitch length
• activate 2
nd
foot stroke
• activate 2
nd
thread tension
• activate 2
nd
gap (gap+)
• deactivate the secondary values
• stop sewing, end of seam (pedal -2)
(automatic end bartack)
Exercise: Sewing in Manual Mode, Gap and Gap+
35