DURKOPP ADLER M-TYPE PREMIUM, User Training Manual

Page: 63 / 68

Exercise: Create a program using Teach-in
63
• Create the program P011 LABEL
• Add and activate the 1
st
seam section and set the basic parameters:
• stitch length: 5mm
• needle thread tension: 25%
• sewing foot stroke: 3 mm
• “Record” 10 points for each seam section segment (by sewing)
• Adjust the parameters for the seam sections:
•
• Set the global parameters of the program:
• Program name: P011 LABEL
Section 1 Section 2 Section 3 Section 4
• Seg.End Mode: Stop
On, Thread Trim Off,
Needle Up Off,
Foot lifted On
• start tack: Off
• end tack: Off
• Seg.End Mode: Stop
On, Thread Trim Off,
Needle Up Off,
Foot lifted On
• start tack: Off
• end tack: Off
• Seg.End Mode: Stop
On, Thread Trim Off,
Needle Up Off, Foot
lifted On
• start tack: Off
• end tack: Off
• Seg.End Mode: Stop
On, Thread Trim Off,
Needle Up Off,
Foot
lifted Off
• start tack: Off
• end tack: On