DURKOPP ADLER DAC basic, Operating Manual

Page: 9 / 23

Operating manual part II
© 2013 Dürkopp Adler AG II-9
L C P Min Max Preset Unity Description
t 08 06 0 2 1 - Motor brake at the normal stop
0 = Brakes for the duration of t0809;
1 = Brake durably actively at the stop
2 = Position will be hold permanently
t 08 07 0,1 6,0 3,0 A Holding current at the machine stop
t 08 08 0 255 40 - Reaction rate at changes of the needle position
t 08 09 0 999 200 ms Period of the motor brake
t 08 10 - - - - Setting the reference position
t 08 11 - - - - Setting the needle positions
t 08 12 0 359 120 ° Lower needle position (Position 1)
t 08 13 0 359 329 ° Thread lever up position (Position 2)
t 08 14 0 359 350 ° Direction finder position
t 08 15 0 359 245 ° on threading position
t 08 19 1 9999 650 - Pulley ratio=
(diameter motor / diameter machine) * 1000
t 08 20 - - - - Calibrating pedal
t 08 21 12 64 24 Steps Number of speed steps of the pedal
t 08 22 0 4 3 - Speed curve
t 08 23 10 255 90 ms Debouncing of the position-1
t 08 24 5 255 15 ms Debouncing of the position-2
t 08 25 0 1 0 - Choice of the pedal
0 = Analogous;
1 = Digital
t 08 26 0 1 0 - Invert the digital signal of the pedal
0 = No;
1 = Yes(Efka-Pedal with adapter )
t 08 30 0 1 1 - Shows the machine speed
0 = No;
1 = Yes
t 08 31 0 1 0 - Shows the current needle position
0 = No;
1 = Yes
t 08 32 0 1 0 - The Needle will move to the upper needle position if the
energy is on and the pedal was used.
0 = No;
1 = Yes
t 08 33 0 6 0 - Output of position signals
0 = No output;
1 = pos1;
2 = pos2;
3 = pos1 & pos2;
4 = machine running (ML);
5 = machine running (ML) & pos1;
6 = machine running (ML) & pos2;
t 08 34 0 255 0 ° Angle for the length of pos1
t 08 35 0 255 0 ° Angle for the length of pos2
t 08 36 10 9999 10 rpm Speed for the activation of motor running signal
t 08 40 500 9999 1500 rpm Speed limitation DB3000
t 08 41 500 9999 1800 rpm Speed limitation DB2000
t 08 50 10 500 180 rpm Speed for single stitch functions(For example half stitch and
full stitch)