Operating manual part II
© 2013 Dürkopp Adler AG
II-13
L
C
P
Min
Max
Preset Unity
Description
t
15 14 0
9999
1500
rpm
Maximum speed for the maximum duty cycle
t
15 20 0,1
2,55
0,50
s
Delay after switch off the edge trimmer for the step trimming
process
t
15 21 0,1
2,55
0,50
s
Delay for move out the step trimmer
t
15 22 0,1
2,55
0,50
s
Time for blowing during move out the step trimmer
t
15 23 0,1
2,55
0,50
s
Delay for switch off the blower after sew stop
t
15 24 0,1
2,55
0,50
s
Delay for switch on the edge trimmer after move out/in the
step trimmer.
Light barrier
t
16 00 50
9999
1000
rpm
Speed for compensating stitches
t
16 01 1
3
3
-
Light barrier mode
1 = Detection on seam begin
2 = Detection on seam end
3 = Detection on seam begin and seam end
t
16 02 0
1
0
-
Mode for the seam begin
0 = Release seam start with light barrier;
1 = Start the seam with foot pedal switch and light barrier;
t
16 03 0
1
0
-
Filter for knitted fabrics
0 = Off;
1 = On
t
16 04 0
1
0
-
Light barrier sensing
0 = uncovered;
1 = covered
Electronic Hand wheel
t
17 00 0
1
0
-
Electronic hand wheel active
0 = No;
1 = Yes (t 51 32 und t 51 33 = 0)
t
17 01 1
255
6
-
Step for electronic hand wheel
t
17 02 0
1
0
-
Direction electronic hand wheel
0 = right;
1 = left
Thread wiper
t
20 00 0
1
0
-
Thread wiper
0 = Off;
1 = On
t
20 01 10
255
100
ms
On Timer for thread wiper
Stitch length switching
t
30 00 0
2
2
-
Speed limitation with long stitch length.
0 = Off;
1 = Speed limitation (DB2000)
2 = Speed limitation (DB3000)
t
30 01 0
2
0
-
Stitch length during backtack
0 = Actual stitch length(long/normal);
1 = Normal stitch length
2 = Long stitch length
t
30 02 0
2
0
-
Stitch length after thread trimming
0 = Manual chosen stitch length;
1 = Normal stitch length;
2 = Long stitch length;
Stitch length reduction
t
31 00 0
255
0
Stitches
Number of stitches with stitch length reduction at seam begin.
t
31 01 0
2
1
-
Stitch length reduction on thread trimming process.
0 = Off;
1 = Stitch length reduction for a hole stitch;
2 = Stitch length reduction only in the trimming process
