Operating manual part II
© 2013 Dürkopp Adler AG
II-15
L
C
P
Min
Max
Preset Unity
Description
t
51 12 -
-
-
-
Hardware-Test
Bold
Inputs or Outputs are only available at DACclassic
controls.
1.Analog
Um: Supply Voltage in V
U24: Supply Voltage for Outputs in V
Imo: Current of the 24V supply
PAn: Analog value of the pedal
Nre: X1.4 Analog Input
Ian:
X1.1 Analog Input
I2T: I²T of the motor (Attention: Footpedal Switch and
Motor are activated!)
2.Inputs
X1.5: Manual Backtack
X1.6: Nedle up/down
X1.7: Additional thread tension (module 2)
X1.8: Switch stitch length (module 1)
X1.9:
Input function module 3 (module 3)
X1.10:
Limitation DB3000
X1.11: Machine run blockage
X1.12:
Bobbin thread monitor
X1.13: Light barrier
X1.14: Backtack suppression/recall
X2.1:
High lift for walking foot (not stored)
X2.2:
High lift for walking foot (stored)
X2.3:
No Function
X2.4:
No Function
X2.6:
No Function
X2.7:
No Function
3.Outputs
X1.15:
Output function module 3 (module 3)
X1.17: No Function
X1.18:
Thread clamp
X1.20: Additional thread tension (module 2)
X1.21:
No Function
X1.22:
LED function module 3 (module 3)
X1.23:
LED bobbin thread monitor left
X1.24: LED Backtack suppression/recall
X1.25:
LED bobbin thread monitor right
X1.26: No Function
X1.27: No Function
X1.28:
Needle cooling
X1.29: LED switch stitch length (module 1)
X1.30: Switch stitch length (module 1)
X1.31: LED additional thread tension (module 2)
X1.32:
High lift for walking foot
X1.34: Backtacking
X1.35: Sewing foot lifting
X1.36: Thread tension
X1.37: Thread trimmer
t
51 13 -
-
-
-
Disturbance reports show the last on 10
t
51 14 0
1
-
-
Reset of the service counter
0 = No;
1 = Yes
