DURKOPP ADLER 911-211, Service Instructions Manual

Page: 16 / 200

Working basis
15 Service Instructions 911-211 - 02.0 - 10/2016
3.3 Removing and opening covers
In many types of setting work, you will have to remove the machine covers
in order to access the components.
This chapter describes how to remove and then refit the individual covers.
The text for each type of setting work then specifies only the cover that
needs to be removed at that particular time.
3.3.1 Access to the underside of the machine
Cover
To access the components on the underside of the machine, swivel up the
machine head.
Fig. 1: Access to the underside of the machine
Swiveling up the machine head
To swivel up the machine head:
1. Release the locking lever (1) under the tabletop.
2. Lift the machine head in the head cover area (2) and swivel up carefully.

The latch (4) latches into place.
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch the machine off before removing or re-placing
covers.
(1) - Locking lever
(2) - Head cover
(3) - Drive carriage
(4) - Latch
① ② ③ ④