DURKOPP ADLER 745-35-10 D, Service Instructions Manual, Page: 4 / 338

Table of Contents
2 Service Instructions 745-35-10 D - 00.0 - 10/2017
4 Transport carriage .................................................................... 73
4.1 Setting the rear end position of the transport carriage ............... 73
4.1.1 Setting the position of the reference switch in the slotted hole ........ 74
4.1.2 Setting the distance between switching screw and
reference switch ......................................................................... 75
4.1.3 Setting the transport carriage stop ............................................. 76
4.2
Changing the toothed belt .......................................................... 77
4.3 Setting the toothed belt tension .................................................. 80
5 Transport clamps ..................................................................... 83
5.1 Aligning the transport clamps with the sliding plate edge ........... 84
5.2 Setting the stroke height of the transport clamps ....................... 85
5.3 Setting the distance of the transport clamps to the folder sole ........ 87
5.4 Setting the front end position of the transport clamp .................. 89
6 Corner knife .............................................................................. 91
6.1 Setting the initial position of the corner knives ........................... 91
6.2 Setting the corner knife parameters ........................................... 92
6.3 Checking the corner knife station ............................................... 94
6.3.1 Checking the front left corner knife ............................................. 95
6.3.2 Checking the rear left corner knife.............................................. 96
6.4
Aligning the corner knife station with the seams......................... 96
6.5 Setting the slant of the corner knife cuts .................................... 99
6.6 Replacing corner knives ........................................................... 100
7 Aligning the marking lamps................................................... 101
8 Light barriers .......................................................................... 105
8.1 Setting the swivel arm .............................................................. 105
8.2 Aligning the light barrier ............................................................ 106
8.3 Setting the light barrier for the flap ........................................... 112
8.4 Aligning the air nozzles for cleaning the reflecting foils ............ 113
9 Setting the folding station plate ............................................ 115
10 Aligning the machine head .................................................... 117
11 Setting fabric sliding plate and vacuum plate ..................... 121
12 Folder....................................................................................... 123
12.1 Assembling the folder ............................................................... 123
12.2 Aligning the folder with the middle of the pocket opening ........ 124
13 Positioning device .................................................................. 127
13.1 Aligning the positioning device ................................................. 127
13.2 Setting the pattern shift correction ............................................ 128
13.3 Setting the throttle valve ........................................................... 129
13.4 Setting the pocket bag feed ...................................................... 130
13.4.1 Setting the loading position ...................................................... 130
13.4.2 Setting the position of the assembly strip ................................. 131
13.4.3 Setting the throttle valve ........................................................... 132
14 Additional equipment ............................................................. 133
14.1 Setting the outfeed roller .......................................................... 133