DURKOPP ADLER 745-35-10 D, Service Instructions Manual, Page: 89 / 338

Transport clamps
Service Instructions 745-35-10 D - 00.0 - 10/2017 87
5.3 Setting the distance of the transport clamps to the folder
sole
Fig. 75: Setting the distance of the transport clamps to the folder sole (1)
Proper setting
There must be a specific distance between the outer edges of the folder
sole (2) and the inner edges of the transport clamps (1). The distance for
moderately heavy clothing fabric must be approx. 1.0 mm to 2.0 mm.
This distance is necessary to ensure both uniform piping strips and unhin-
dered transport of the sewing material.
To set the distance of the transport clamps to the folder sole:
1. Check the loading process and the distance between the outer edges
of the folder sole (2) and the inner edges of the transport clamps (1).
2. Lower the folder.
3. Remove the locking plates on the left and the right.
NOTICE
Property damage may occur!
The transport clamp may damage the folder sole.
The folder sole may damage the transport clamp.
The transport clamp position must be adjusted to the appropriate
folder.
(1) - Transport clamp (2) - Folder sole
① ②