DURKOPP ADLER 669 CLASSIC, Operating Instructions Manual

Page: 74 / 118

Setup
72 Operating Instructions 669 - 00.0 - 08/2019
6.4.5 Assembling the tabletop to the stand MG 55-3
Fig. 40: Assembling the tabletop to the stand
To assemble the tabletop to the stand:
1. Place the table top (2) on the floor upside down.
2. Fasten the stand 4 to the tabletop (2) using wood screw
Be sure to note the marking for the stand ( 
p. 66
),
( 
p. 68
).
3. Set up stand (4) with tabletop (2).
4. Attach the rod (3) onto the pedal and motor.
5. Put the reel stand (1) into the drilled hole in the tabletop (2).
Fasten with nut and washer.
6. Mount and align the reel holders and thread guide.
 The thread guide must be positioned above the reel holders.
(1) - Reel stand
(2) - Tabeltop (3) - Rod
(4) - Stand
④
①
②
③