DURKOPP ADLER 669 CLASSIC, Operating Instructions Manual

Page: 66 / 118

Setup
64 Operating Instructions 669 - 00.0 - 08/2019
6.3 Assembling the stand
There are two stand sets with different table plates available:
• MG 55-3: not separated, with or without cut-out
• MG 56-3: separated, hinged
6.3.1 Assembling the stand MG 55-3
Fig. 32: Assembling the stand MG 55-3
To assemble the stand:
1. Assemble the stand according to the illustration.
2. Fasten the pedal (2) to the stand brace (1).
3. Mount the stand brace (1) to the stand.
4. Align the pedal.
5. Screw on the holder for the oil can (3).
6. Turn the adjusting screw (4) to ensure a secure mount on the
stand.
 The stand must be resting with all 4 feet on the floor.
(1) - Stand brace
(2) - Pedal (3) - Oil can
(4) - Adjusting screw
③
①
②
④