DURKOPP ADLER 669 CLASSIC, Operating Instructions Manual

Page: 70 / 118

Setup
68 Operating Instructions 669 - 00.0 - 08/2019
6.4.2 Completing the tabletop for stand MG 55-3 with
direct drive
Fig. 36: Completing the tabletop
To complete the tabletop:
1. Turn over the tabletop (5)
2. Screw on the cable duct (1).
3. Screw on the motor control (2).
4. Screw on the power supply (3).
5. Screw on the knee switch (4).
6. Screw on the setpoint device (8).
7. Screw on the drawer (6).
8. Screw on the sewing light transformer (7).
(1) - Cable duct
(2) - Motor control
(3) - Power supply
(4) - Knee switch (5) - Tabletop
(6) - Drawer
(7) - Sewing light transformator
(8) - Setpoint device
⑥ ⑦ ⑧ ①
(3,5x17) x6 (4x20) x2 (3,5x17) x2
② ③ ④ ⑤
(4x20) x2