48
Chapter 6 Reference
●
To switch among input signals
Press
on the remote control to change over the input signal.
When the signal is switched, the active input port name appears at the top right corner of the screen.
Note
•
on the monitor also can change the input.
●
Adjusting screen brightness
Adjust the brightness of the monitor screen by changing the brightness of the backlight (light source
at the back of the LCD panel).
Adjustable range
0 to 100
Procedure
1.
Press
or
on the remote control.
The brightness adjustment menu is displayed.
2. Set the brightness with
or
.
The menu disappears automatically after approximately five seconds.
●
Specifying color space
The color space of the input signal can be specified. Change the settings when colors are not
displayed accurately.
Attention
•
“Auto” cannot be selected during PC signal input.
Adjustable range
Auto, YUV 4:2:2, YUV 4:4:4, RGB Full Range, RGB Limited Range
Procedure
1.
Press
on the remote control.
The Adjustment menu is displayed.
2. Select “Color Space” with or and press
.
3. Use or for adjustment.
4. Press
.
5.
Press
to exit the Adjustment menu.
Summary of Contents for FDF2304W-IP
Page 2: ......
