30
Chapter 4 Configuring the System
4-4. Setting Display Positions of Camera Images
Set the display position for images from the network camera.
Procedure
1.
Select “Position”.
Indicates the
display positions
on the monitor
screen.
1
2
3
2.
Configure the items.
Item
Detail
Setting range
Position
Select a position to display a camera image.
Set the network camera to the number of the
desired position for display.
-
Camera Name Display
Select to display or not display the camera name
and time set on the monitor. (The camera name is
displayed on the upper left of the image.)
On/Off
Sequence Interval
Set the interval for changing over the screen during
sequential display.
5s to 60s
Aspect Ratio Mode
Set which aspect ratio to apply when the aspect
ratio of the video delivered from the network camera
and the aspect ratio of the monitor image display
area differ.
Full/Aspect
3.
Select “Apply”.
The setting complete screen is displayed. Select “OK”.
Attention
•
All registered cameras must be set. A network camera can only be set for one display position. When there are
incorrect settings, “Apply” cannot be selected.
Summary of Contents for FDF2304W-IP
Page 2: ......
