PF Conveyors | Installation, Operation & Maintenance Manual
15
u
Daily Cleaning (continued)
/ Dnevno čišćenje (nastavak)
EN
13
Wipe under the tail pulley.
14
Lower the tail pulley into
place.
15
Replace both pins in the
conveyor’s tail pulley.
16
Wipe both sides of each
clear plastic guard.
CR Obrišite ispod repne remenice
Spustite repnu remenicu na svoje
mjesto
Zamijenite oba klina u repnoj remenici
transportne trake
Obrišite obje strane svakog štitnika
START
STOP
RESET
EN
17
Replace the clear plastic
guards by sliding over
the twist nuts at the corresponding
numbers on the conveyor. Turn the
nuts to the horizontal position to
lock in place.
18
<START> the conveyor
( ).
ES Zamijenite štitnike klizeći preko
zavrtnih matica na odgovarajućim
brojčanim pozicijama i uvijanjem
matica u vodoravni položaj da se
zaključaju na mjestu
Pokrenite transportnu traku
