12
PF Conveyors | Installation, Operation & Maintenance Manual
Operation
/ Pogon
u
Starting
/ Pokretanje
u
Stopping
/ Zaustavljanje
START
STOP
RESET
START
STOP
RESET
EN
1
Start the conveyor by turning
the control switch to <START>
(
).
1
Stop the conveyor by turning
the control switch to <STOP>
(
).
CR Pokrenite transportnu traku okretan-
jem prekidača upravljača na Start
( )
Zaustavite transportnu traku
okretanjem prekidača upravljača na
Stop ( )
If the conveyor does not start, check that all of the clear plastic guards are in place and that the emergency stops are in the depressed position. If the conveyor still does
not start, refer to the “Troubleshooting” section of this manual on page 24.
Ako se transportna traka ne pokrene, provjerite jesu li svi štitnici na mjestu i jesu li tipke za hitno zaustavljanje u pritisnutom položaju. Ako se transportna traka i dalje ne
pokreće, provjerite odjeljak za rješavanje problema u ovom priručniku.
u
Resetting
/ Resetiranje
START
STOP
RESET
START
STOP
RESET
EN
1
If an alarm condition occurs,
the control must be reset.
2
Turn the control switch to
<RESET> (
) and hold for
one second.
3
If the control displays “0”,
the alarm has been cleared.
4
Start the conveyor by turning
the control switch to <START>
(
).
CR Ako dođe do stanja alarma, upravljač
se mora resetirati
Okrenite prekidač upravljala na Reset
( ) i držite jednu sekundu
Ako kontroler prikaže “0”, alarm je
obrisan
Pokrenite transportnu traku okretan-
jem prekidača upravljača na Start
( )
If the alarm condition does not clear, refer to the manufacturer’s manual for the controller.
Ako se alarm ne poništi, pogledajte priručnik proizvođača upravljača.
