3–12
975-0347-01-01
Connecting the Chassis Ground
The Duracell has a screw terminal labelled
CHASSIS GND
on the rear
panel as shown in Figure 3-3 on page 3–12. Follow the guidelines in
“Grounding Locations” to connect the inverter’s chassis to the ground.
Grounding Locations
You must connect the chassis ground terminal to a grounding point. The
grounding point varies depending on where you install the Duracell.
•
For recommended chassis ground cable size, see Table ,
“Calculating Size of Chassis Ground Cable” on page 3–7.
Follow the instructions that correspond to your type of installation:
WARNING: Shock hazard
Never operate the Duracell without properly connecting the chassis
ground. Electrical shock hazard could result from improper grounding.
Figure 3-3
DC Panel Connections
Duracell1000.book Page 12 Friday, September 7, 2007 1:47 PM
Summary of Contents for inverter 1000
