11
1
Attach the AC bus cable with the mounting rail, and fix the cable with tie wraps.
2
Push the AC connector of the microinverter to the trunk cable bus connector until you hear “click”.
3
Plug unused AC connetors with the AC sub cap on the vacant
plug to ensure waterproof and dustproof.
Note: If there is a need to remove the inverter AC cable
from the bus port, please use the AC connector unlock tool
and insert the tool into the side of AC port.
5.9 Creating an Installation Map
1
Peel the removable serial number label from each microinverter (see images below for label location).
2
Affix the serial number label to the respective location on the installation map. Mark off panel clusters that share a single
serial number for dual and quad microinverters as shown in the example below. Print one sheet (see - Appendix A) for
each unique facing panel group based on tilt and azimuth.
Quad
x
Branch
Dual
Panel
5.8 Installation: Connecting the AC trunk cable to the microinverters
Installation Manual
Summary of Contents for D1500-M4
