Duracell D1500-M4, Installation Manual

Page: 4 / 28

1
1.1 Product Range
This manual describes the assembly, installation, commissioning, and maintenance of the following models of Power
microinverters:
D350-M1 / D700-M2 / D1500-M4
1.2 Target Group
This manual is only for qualified technicians, who have been trained or have demonstrated skills to install and maintain
this microinverter under the guide of this document for safety purposes.
2.1 Important Safety Instructions
The microinverters are designed and tested according to international safety requirements. However, certain safety
precautions must be taken during installation and operation. The installer must read and follow all instructions, cautions
and warnings in this installation manual.
All operations including transport, installation, start-up and maintenance, must be carried out by qualified, trained personnel.
Before installation, check the unit to ensure free of any transport or handling damage, which could affect insulation integrity or safety
clearances. Choose the installation location carefully and adhere to specified cooling requirements. Unauthorized removal of necessary
protections, improper use, incorrect installation and operation may lead to serious safety and shock hazards or equipment damage.
Before connecting a microinverter to the power distribution grid, contact the local power distribution grid company to get appropriate
approvals. This connection must be made only by qualified technical personnel. It is the responsibility of the installer to provide external
disconnect switches and Over current Protection Devices (OCPD).
Only one photo voltaic module can be connected to one input of the inverter. Do not connect batteries or other sources of power supply.
The inverter can be used only if all the technical characteristics are observed and applied.
Do not install the equipment in adverse environment conditions such as flammable, explosive, corrosive, extreme high or low
temperature, and humidity. Do not use the equipment when the safety devices do not work or disabled.
Use personal protective equipment, including gloves and eye protection during the installation.
Inform the manufacturer about non-standard installation conditions.
Do not use the equipment if any operating anomalies are found. Avoid temporary repairs.
All repairs should be carried out using only qualified spare parts, which must be installed in accordance with their intended
use and by a licensed contractor or authorized Power service representative.
Liabilities arising from commercial components are delegated to their respective manufacturers.
Anytime the inverter has been disconnected from the public network, please be extremely cautious as some components can retain charge
sufficient to create a shock hazard. Prior to touching any part of the inverter please ensure surfaces and equipment are under touch safe
temperatures and voltage potentials before proceeding.
Power accepts no liability for damage from incorrect or improper operation.
Electrical Installation & Maintenance shall be conducted by a licensed electrician and shall comply with Local Wiring Rules.
1 Important Notes
2 Safety
Installation Manual
Installation Manual