Chapter 1 Equipment overview
6
Precautions when installing and moving the K-BINDER501
CAUTION
Do not install the K-BINDER501 at locations with high temperature and high
humidity or at locations with dust and insufficient ventilation. This may result in
fire or electric shock.
Do not install the K-BINDER501 at locations close to heating devices such as a
stove or heater. This may result in fire.
Do not install the K-BINDER501 at locations directly exposed to sunlight. This
may result in failure of the K-BINDER501.
Temperature and humidity of the room where the K-BINDER501 is installed
should be kept within the following range with little fluctuation.
Operating temperature: 15°C to 30°C or 59°F to 86°F (no drastic changes)
Operating humidity: 25% to 70% (no condensation and no drastic changes)
Installation and moving of the K-BINDER501 must be performed by a Kyokko
Seiko appointed service company and service technician. Kyokko Seiko bears
absolutely no responsibility for any damage, breakdowns, or malfunctioning
resulting from installation or moving by anyone other than a Kyokko Seiko
appointed service company and service technician, and Kyokko Seiko extends
no guarantees regarding safety in such a case. If you need to have the K-
BINDER501 installed or moved, consult the place of purchase.
To allow escape in the event of danger and to enable access for operation and
maintenance of the K-BINDER501 and replacement of consumable items, leave
the installation space as shown in the figure below. Keep the floor free of
obstacles.
