Chapter 1 Equipment overview
3
Introduction
Thank you for purchasing the perfect binder K-BINDER501. After the printed matter that is output from
devices (such as an electrophotographic printer or ink jet printer) is set on the K-BINDER501, the
equipment automatically aligns the printed matter, perfect-binds it, and then ejects the bound book.
This manual is intended for beginner operators and describes operational procedures, daily maintenance,
and safety precautions related to the K-BINDER501.
In order to fully utilize its functions and performances, and to use the K-BINDER501 for many years to
come, please make sure to read this manual thoroughly before operating the K-BINDER501.
Even after reading this manual, please take good care of this manual so that it can be used whenever
required.
Although we have made every attempt to make this manual as clear and accurate as possible, if you notice
any omissions, or any section that is unclear or erroneous, please contact the place of purchase.
When exporting the K-BINDER501
International transfer of the K-BINDER501, any of its parts and/or components must be carried out in
compliance with the relevant laws and ordinances of the country of export and the country of equipment
end-use. We do not assume any responsibility or liability for equipment transferred without regard to
proper export/import regulations or procedures.
Liability
Be aware that it is possible that a portion of this manual may not match exactly with your K-BINDER501
due to some reason such as changes in the specifications.
Duplo USA Corp. accepts no responsibility for any damage that occurs to the K-BINDER501 due to
situations that it has no control over, such as remodeling, disassembly, misuse, or inadequate environment
provided by or performed by the customer.
Duplo USA Corp. will bear absolutely no responsibility for any lost profits or damages resulting from the
operation of the K-BINDER501.
Safety Information
U.S.A only
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the Fcc Rules.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
WARNING
The design and production of this unit conform to FCC regulations, and any changes or modifications
must be registered with the FCC and subject to FCC control.
Any changes made by the purchaser or user without first contacting the manufacturer will be subject to
penalty under FCC regulations.
Canada only
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
