31
Chapter 8 Technical information
2. Bookbinding
workflow
1
Turn ON the power. (Refer to “1. Turning ON the power” in Chapter 3.)
2
When the operation in the warm-up mode completes, the book supply shutter
opens and the equipment enters the standby mode. At this time, the COUNT
display and the cover size lamp corresponding to the cover size set for cover
size adjustment guide 2 light up.
Standby mode screen (photo shown Europe 230V version)
3
Load a book block in the sub clamp unit.
4
Press the [START] button.
The book supply shutter closes and bookbinding starts.
When the bookbinding has completed, a bound book is ejected via the delivery block.
At the same time, the number shown on the COUNT display is increased by one unit.
2.1
About the cool down mode
When bookbinding is not executed within 10 minutes (*) in the standby mode, the K-
BINDER501 automatically decreases the temperature of the glue in order to prevent the
glue from deterioration. This sequence is called the “cool down mode”.
*: The set time to enter from the standby mode to the cool down mode can be changed to
any of a total of seven settings. When you need to change the setting time, please
contact the place of purchase.
Cool down mode screen (photo shown Europe 230V version)