44
Chapter 8 Technical information
Chapter 7 Troubleshooting
When an operation error such as cover jam or book block jam occurs to the K-BINDER501, the
TROUBLE lamp on the operation panel lights up. At the same time, a relevant error code is
shown on the COUNT display.
Operation panel (photo shown Europe 230V version)
1. Book block jam
1.1
When error code J2 is shown on the COUNT display
A book block remains in the main clamp unit.
1
Open the front cover 2.
2
Remove the book block remaining in the main clamp unit.
After glue is applied to a cover and a book block, the glued areas are
extremely hot. Therefore, when removing a jammed block, either take care
not to touch the glued areas or remove the block after it has fully cooled
down.
Book block
3
Close the front cover 2.
When front cover 2 is closed, the COUNT display on the operation panel
starts blinking and the equipment enters the warm-up mode.
