Duplo DC-645, Instruction Manual, Page: 76 / 106

75
1
Basic Oper
ations
4
Clean Feed Rollers
As DC-645 process digital colour outputs, toner etc. on the documents may adhere to the surface of feed rollers of DC-
645. When the accumulation of such toner becomes excessive, it may effect the performance of DC-645. In this case,
clean the rollers in following procedures.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Press the “ | ” side of the power switch, while
pressing the
<MODE> key, to turn ON the
machine.
The machine is started up with the Cleaning
Mode.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Open / Close Top Cover 1.
Every time the top cover (1) is opened/closed,
the feed rollers turn 60 degrees. Wipe-off the
toner, debris on the rollers using a tightly
wrung cloth. The entire roll is cleaned around
its circumference by opening/closing the top
cover 6 times.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Press the power switch of the “
K K
K K K
” side to turn
OFF the power and quit the Cleaning Mode.
CLEANING MODE
STOP–>POWER OFF
F
IMPORTANT
• Do not wipe the rollers with anything other
than that designated above. Use of anything
else may result in mechanical malfunction.