Duplo DC-645, Instruction Manual, Page: 48 / 106

47
12
Prog
ram JOB f
o
r DC-645
Via Computer
(J
O
B
C
re
a
to
r)
JOB Creator Settings
JOB Saved on Computer Registered On DC-645
(“Download Job Data to DC-645”)
This section describes the procedures to register on the DC-645 a JOB saved on the computer.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Click the [Download Job Data to DC-
645] button.
A display appears to select a JOB file
to send to the DC-645.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Check whether the JOB file intended
to register on the DC-645 is selected.
Then click the [DOWNLOAD]
button.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Click the [File...] button. Select and
click the file to register on DC-645,
then click the [Open] button.
Tip
• Extension of a file saved with ONE
JOB data: .djob
Extension of a file saved with ALL
JOB data: .dall
Tip
• When sending ONE JOB (with .djob
extension), if that JOB number
already exists in the DC-645
memory, then a display will appear
whether to overwrite the existing
JOB with this JOB.
IMPORTANT
• If the document file has a “.dall”
extension, then the maximum
JOBs that can be registered on
the DC-645 are all saved.
When registering a file with a
“.dall” extension on the DC-645,
all JOBs registered on the DC-645
at that time will be overwritten.
A display will appear to check
whether to overwrite all JOBs
when sending the data.
Confirm whether it is okay to overwrite the data
and if so click the [YES] button and send the
data.
Continue Page
• • •