55
1
3
Prog
ra
ming JOB f
or DC-645 on Control P
anel
AUTO CUT
Paper area before first cut and after last cut, and area between 2 cuts which is 20 – 84.99 mm long, are considered to be
waste and will be chopped up for disposal in waste box when AUTO CUT is enabled.
Definition of Programming Terms
Example 1 - When AUTO CUT must be OFF
Example 2 - When AUTO CUT must be OFF
When documents do not have lead or trail margin, (as in the example 1 and 2 below), make certain to turn OFF the
AUTO CUT feature.
Leading edge of the paper
First Cut
Last Cut
When the distance between two cuts
arre 20 – 84.99 mm long, they will be
chopped up for smooth disposal into the
waste box.
Area where automatic
cutting can be done
Summary of Contents for DC-645
Page 27: ...26 Select Options Delete Bold and _underline_with real formatting Before Preparing Document...
Page 105: ...MEMO...
Page 106: ......