Duplo DC-645, Instruction Manual, Page: 54 / 106

53
12
Prog
ram JOB f
o
r DC-645
Via Computer
(J
O
B
C
re
a
to
r)
If the problem is not solved with the above remedies, contact the service personnel.
Message Countermeasure
DC-645 is busy.
ERROR on DC-645
Load Paper
Install the Slitter Module.
Install the Standard Module.
Install the Business Card Module.
The DC-645 is in operation.
1. Either wait for the JOB to quit or press the <STOP> key on the DC-
645 to abort the JOB.
2. DC-645 is not ready to operate.
End the function setting, input, and JOB select mode, and go to the
Operation Mode (regular state).
3. An error has occurred with the DC-645.
Check the message displayed on the LCD panel and correct the error
according to the Troubleshooting Instructions described in this
Instruction Manual.
(
a
P.78 “OK Monitor Display and Jam Display”)
(
a
P.80 “Error Display”)
(
a
P.82 “Warning Display”)
Error is detected on DC-645.
Check the LCD panel for the Error display. Correct the Error, JAM and/or
Warning according to the procedures described in “Error Display” (P.80),
“Warming Display” (P.82), and “When a Paper Jam Has Occurred” (P.83 –
99).
There is no document set in the 645 feed tray.
Install the Slitter Module on DC-645.
Install the Standard Module on DC-645.
Install the Business Card Module on DC-645.
List of Message