57
1
5
Manual
Programming - DC545 HCEX
JOB DESIGN ISSUES
1) Orientation of small format (business) cards
Although the smallest format supported is 88.9 x 50.8 mm, the 88.9 mm side must be in the direction of feed, otherwise
the pieces will drop between the transport rollers. This is because the center slitters must be able to move across the
paper path.
Definition of Programming Terms
2) Arrangement of small format (business) cards on large sheets (A3+ or oversized ledger)
Business cards requiring a bleed and gutter, require the use of two slitters between each card. Because more business
cards are fit onto A3 or ledger in this format compared to A4 or letter, the number of slitters required will be more than
the maximum of 4 available.
Workaround solution - arrange 12 to view on A3 or ledger, place the register mark in two positions, 210 mm apart. Print
on A3, cut in half using a guillotine (or use the 545). Then place both stacks in the 545 and process as if A4 or letter.
The reg. mark will enable the device to adjust and compensate both for image drift and for any inaccuracy in the
guillotine cut.
Docu Cutter(HCEX) 5_53-69
03.12.8, 3:11 PM
57
