APT3700N Smart Pressure Transmitter for Nuclear Service Operation Manual M3700N-K01E
29
Change LCD Mode
- Zero+Span button should be pressed to activate Menu
-
1 TRIM
message is indicated Zero button pressing to move menu
-
2 SETUP
message is indicated Zero button pressing to move menu
-
3 LCD
message is indicated Span button pressing to move to lower menu
-
31 LCD-MD
message is indicated Span button pressing to move to perform
function
- LCD Mode setting function performance shows the LCD
mode possible for the 2nd line
of the LCD of showing the LCD mode, and the following content indication is as follows.
content
indication
describe
note
NOR_RO
Normal Rotation Mode. PV, %, mA is shown rotating
NOR_PV
Normal PV Mode. shows the only measured PV
NOR_%
Normal Percent Mode. shows the measured PV value of
the Percent Range
NOR_mA
Normal mA Mode. measured PV value is shown in
4~20mA electricity
ENG_RO
Engineering Rotation Mode. Engineering PV, %. mA
rotating
ENG_PV
Engineering PV Mode. setting value of the
Engineering Range PV change.
- While pressing the Zero button, the LCD Mode changes and the wanted mode should be
selected and the Span button should be pressed to save the setting value
Decimal Place
- Zero+Span button should be pressed to perform the Menu.
- 1 TR
IM message is indicated press the Zero button to change.
- 2 SETUP
message is indicated Zero button pressing to move menu.
- 3 LCD
message is indicated Span button pressing to move to lower menu.
- 31 DEC-PL
message is indicated Span button pressing to move to perform function.
Decimal Place setting function performing shows a LCD in the second line of the point
indicated shows a content indication as follows.
