APT3700N Smart Pressure Transmitter for Nuclear Service Operation Manual M3700N-K01E
18
[Figure 5 Transmitter Power Limit Supply]
2.5. Install Consideration
2.5.1. Mechanical
Product's outside view should refer to [Figure 1].
Installing Bracket and installing way should follow the same way as [Figure 2].
2.5.2. Electronic
The following Transmitter uses the capacitance or Piezo-electric type’s pressure
sensor and if the approved pressure is changed, the following sensor’s capacitance
changes slightly. These distinct electric signal changes in the settings of the analog
setting range. The following measure value’s accuracy is Transmitter’s setting and
impulse piping as a difference. To receive a good accuracy, the
Transmitter has to Fixation the process closely and shortens the pipe’s length.
Transmitter’s easy handling, a person’s safety handling and actual field easy
correction should be considered. Also the vibration and other impact and
temperature change is installed in the lowest transmitter. Transmitter inner housing
is separated into two different parts. One part is electronic circuit, the other part is
personal socket (Terminal Block). Personal Socket part is the Transmitter back side
