APT3700N Smart Pressure Transmitter for Nuclear Service Operation Manual M3700N-K01E
11
2.
2. Installation
2.1. Overview
The following describes the following information about installing.
●
General Consideration
●
Mechanical Consideration
- Process connection
- Conduit
●
Electrical Consideration
●
Installation Consideration
- Installation Procedure
Mechanical
Electrical
2.2. General Consideration
Pressure, flux, water level's measurement can show an effect with the pipe and valve's
combination. Also the transmitter's installation should require at least the minimum
temperature change, vibration, and shock.
A wrong installation may give a measurement error. Transmitter's verification
measurement is effected in the installation of the surrounding temperature.
2.3. Mechanical Consideration
The following content contains information about transmitting Mounting, and the user
should acknowledge this before installing the transmitter. Refer to [Figure 1 Transmitter
Layout]
When installing APT3700N Series' the types of Mounting Brackets that were used were
divided into 3 categories of Flat Type, Angle Type, and Wall Type. The Bracket that is
used at the nuclear energy plant without the user's special notice is the Wall Type
Bracket.
