Si
gn
at
ur
e
Be
nc
h
In
st
al
la
ti
on
(
O
pt
io
n)
ph: 519-923-9813 | [email protected]| web: www.dundalkleisurecraft.com
23
Dundalk LeisureCraft
Panoramic Barrel Sauna Assembly Instructions
Position the angled center dome bench support so that
the bench is level and brace is also flush with the
bottom of the bench.
Using 2 ½” (64mm) screws, screw the bottom of the
bench support into the floor on the front and in either
side using the pre drilled pocket holes.
Screw the dome bracket to the dome seat from
underneath using 4- 1 ½” (38mm) screws.
To install the signature back rest, position on wall at
desired height and fasten with 2 ½” (64mm) screws.
* Place screws under the top board in the vertical
uprights to keep them less visible.
