background image

model

 H1011.

8HPS

HO

-19

20

HPS

HO

FEATURES & BENEFITS

REQUIRED MODELS

H1011.8

HPS

HO

 / MTGFR.LG / 

HCR8 / 1920

HPS

HO

 / BP32

HPS

Order  these  items  to  make  up  the  Model 

H1011.8

HPS

HO

-1920

HPS

HO

 

fountain  with  stainless  steel 

back panel and grille, bottle filler with stainless steel back 

plate, and remote chiller shown above.

OPTIONS

1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [email protected] :: www.hawsco.com :: 

2

0 July

,

 202

2

DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.

SPECIFICATIONS

Model  H1011.8HPSHO-1920HPSHO  vandal-resistant  wall-mounted 

ADA  combination  motion  activated/push  button  water  cooler 

and  bottle  filler  shall  include  dual  18-gauge  Type  304  polished 

Stainless Steel basins with integral swirl design, 14 gauge Type 304 

polished  Stainless  Steel  wall  brackets  and  bottle  filler  bracket, 

100%  lead-free  waterways,  touchless  sensor  operated  solenoid 

valves with 30-second obstruction time-out on the bottle filler and 

on one side of the fountain, and push-button operated stainless-

steel valve with front-accessible cartridge and flow adjustment on 

the other, polished chrome-plated brass vandal resistant bubbler 

heads with integral laminar anti-squirt flow, 1 gpm (3.78 L) laminar 

flow  bottle  filler,  chrome-plated  brass  vandal-resistant  waste 

strainers, vandal-resistant bottom plates, stainless steel satin finish 

back  panels  and  louvered  intrusion-proof  grill,  high  and  low 

fountain  mounting  levels,  and  1-1/4”  O.D.  (3.2  cm)  waste  pipes. 

The R-134a refrigeration system is hermetically sealed and delivers 

a minimum of 8 gph (30.3 L) of water at 50° F (10° C), 115 Volts, 

60Hz,  rated  watts:  370,  full  load  amps:  5.  Haws  electric  water 

coolers comply with ARI Standard 1010 and ANSI A117.1, and are 

listed  by  Underwriter  Laboratories  to  U.S.  and  Canadian 

standards. Manufactured to be lead-free by all known definitions 

including  NSF/  ANSI/CAN  61-Section  9,  NSF/ANSI/  CAN  372, 

California Proposition 65, and the Federal Safe Drinking Water Act. 

Product is compliant to California Health and Safety Code 116875 

(AB 1953-2006), and NSF/ ANSI/CAN 61: Q ≤ 1.

Mounting Plate: Model 6700, in-wall mounting plate for 

model 1920

HPS

.

Mounting  Plate:  Model  6700R,  on-wall  mounting  plate 

for model 1920

HPS

.

Water Filter: Model 6426, 12" x 2" (30.5 x 5.1 cm), in-line 

lead removal element that reduces lead from incoming 

water supply.

CONSTRUCTION

Rugged  ADA  accessible  18  gauge  Type  304 

Stainless Steel

 

swirl  design  bowls,  14  gauge  Type  304 

Stainless  Steel

 

brackets  and  bottle  filler,  and 

vandal-resistant bottom

 

plates  provides  a  long  lasting 

unit with added peace of

 m

ind.

BOTTLE FILLER

Vandal-resistant,

 

14-gauge

 

Type

 

304

 

stainless

 

steel

 

bottle

 

filler  housing  with  touchless  operation and 

1 gpm (3.78 L)

 l

aminar flow

FOUNTAIN VALVES

Fountain  incorporates  touchless  sensor  operated 

stainless

 

steel

 

solenoid

 

valves

 

controlled

 

by

  a 

transformer

 

on  the  bottle  filler  and  on  one  side  of  the 

fountain,  and  a  push-button  activated  valve  which 

offers  the  only  all  stainless-steel  valve  body  that  is 

machined out of solid bar stock and is fully serviceable 

through  the  front  of  the  push  button  assembly 

offering access  to  the  water  control  cartridge  and 

integral water supply strainer on the other.

BUBBLER HEADS

Polished

 

chrome-plated

 

brass

 

bubbler

 

heads

 

with 

integral

 

laminar flow prevents splashing while providing 

asuperior

 

flow

 

pattern.

 

The

 

integral

 

11/16"

 

dia.

 

basin

 

shank

 

and

 

stainless  anti-rotational  roll  pin  add 

vandal  resistant

 

strength.  Shielded,  angled  stream 

opening  provides  a

 

steady  source  of  drinking  water 

at .45 gpm.

MOUNTING

Heavy-duty  16-gauge  galvanized  steel  mounting

 

frame

 

with  welded-in  heavy-duty  10  gauge  mounting 

plate  with

 

pre-punched  mounting  holes.  Further 

convenience  is

 

given  to  the  chiller  with  the  integral 

fold-out shelf.

FOR INDOOR USE ONLY

VANDAL-

RESISTANT

The  bubbler  heads,  push  button,  round  bowls,  drain 

strainers  and  bottom  plates  are  locked  in  place, 

discouraging unwanted vandal tampering.                        

ADA Vandal-Resistant Chilled Motion-Activated/Push Button Fountain w/Bottle Filler

Summary of Contents for H1011.8HPSHO-1920HPSHO









Reviews: