Si
gn
at
ur
e
Be
nc
h
In
st
al
la
ti
on
(
O
pt
io
n)
ph: 519-923-9813 | [email protected]| web: www.dundalkleisurecraft.com
19
Dundalk LeisureCraft
Panoramic Barrel Sauna Assembly Instructions
(Electric Heater Models)
Position the short bench enclosure ½” (13mm) from the
dome groove on the edge of the floor at the dome end,
Do not Fasten!
* For the Harvia M3 Heater option, or full length
benches on both sides, skip this step!
With the short bench enclosure square to the floor,
use it as a guide to install the angled bench supports
to the barrel wall using 2 ½” (64mm) screws.
* Do not fasten the front enclosure yet.
Repeat at other end of bench.
With the long bench enclosure square to the floor,
use it as a guide to install the angled bench supports
to the front barrel wall using a 2 ½” (64mm) screw.
The top of the flat end of the bench support and the
top of the front enclosure should be flush.
