St
an
da
rd
B
en
ch
In
st
al
la
ti
on
(
St
an
da
rd
)
ph: 519-923-9813 | [email protected]| web: www.dundalkleisurecraft.com
14
Dundalk LeisureCraft
Panoramic Barrel Sauna Assembly Instructions
Install the Dome bench bracket ½” (13mm)from the
dome groove in the staves making sure the top of the
bench bracket is level.
If the sauna floor is purchased, the Front of the dome
bench bracket should sit tight to the side of the flat
floor.
Using the pre drilled holes in the bracket, screw the
dome bench bracket to the sauna on the top and
bottom with 2” (51mm) screws.
Repeat on opposite side of sauna.
You can use a level to ensure both brackets are at same
height.
* For Electric Heater option skip to next step!
If you purchased a Harvia M3 wood heater or full
length benches on both sides with your Panoramic
Barrel Sauna install the bench brackets on the front
wall on either side in the same manner as the dome
bench brackets.
