Si
gn
at
ur
e
Be
nc
h
In
st
al
la
ti
on
(
O
pt
io
n)
ph: 519-923-9813 | [email protected]| web: www.dundalkleisurecraft.com
20
Dundalk LeisureCraft
Panoramic Barrel Sauna Assembly Instructions
Screw bench brackets into end walls as well using 3- 2 ½”
(64mm) screws in each bracket.
* Do not fasten the front enclosure yet.
If you purchased a Harvia M3 wood heater or full length
benches on both sides with your Panoramic Barrel Sauna
perform this step for both side benches of your sauna.
Remove the front enclosures and gently place the
bench seats on the 2 x 4 (51mm x 104mm)
brackets. Ensure that seats are all the way back
against the side of the barrel.
Using 2 ½” (64mm) screws, Install the small support
brackets ensuring they are flush with the bottom of the
bench seats.
With a 2 ½” (64mm) screw, fasten the bottom of the
support into the floor.
Make sure seats stay back against the side of barrel.
Screw up through brackets into the bench seat
using 1 ½” (38mm) screws.
(3 screws per bracket)
