
Soft Serve Freezer Model GES-102
46
184559
13 Routine Maintenance
(continued)
MONTHLY (
continued)
C. MTS Cover Switch
The MTS cover switch feature is
designed to prevent the MTS gear motor
from being accidentally activated. It is
essential that the proper operation of this
switch be verified on a routine basis. Use
the following instructions to test for proper
operation:
NOTE: Freezer should be cleaned
and disassembled for this test.
1. Be sure all switches are in the “OFF”
position.
2. Remove the MTS cover to expose the
roller assembly.
3. Turn MTS switch to “ON”.
4. Look at the MTS rollers; they should
NOT
be rotating. If they are rotating,
turn “OFF” mix switch and discontinue
use until repairs can be made.
5. If there is no movement, slowly install
cover and listen for the gear motor
to turn on. The cover should be
almost completely closed when the
gear motor turns on.
DO NOT
insert
fingers or objects into roller cavity
during this test. If the MTS does not
operate as described here, or you
are unable to determine if the MTS is
operating properly, turn the switches
to the “OFF” position, disconnect the
main power supply and contact your
service technician or the factory.
DO
NOT
place the freezer in service until
the problem has been corrected.
D. R
eplace the Mix Transfer
Hose
CAUTION
Make sure the freezer
is depressurized before
proceeding.
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure all switches are in
the “OFF” position and that
the main power supply is
disconnected. Some freezers
have more than one disconnect
switch.
CAUTION
Make sure system is
depressurized before
proceeding.
CAUTION
DO NOT place hands near the
MTS rollers. Severe personal
injury could result.
A. Air Condenser.
Important:
Never use a screwdriver or sharp
object to clean between fins.
Both air and water cooled freezers have
an air condenser. The condenser fins
need to be cleaned by your H.C. Duke &
Son, LLC. Distributor to remove dirt, lint
and dust.
B. Refrigeration System
Have your H.C. Duke & Son, LLC.
Distributor check the refrigeration system
and make any necessary adjustments.
WARNING!
Failure to properly maintain/clean your air condenser can cause
premature compressor failure. Compressor failure due to improper
condenser care will void the compressor warranty.
QUARTERLY
Summary of Contents for GES-102
