Duke GES-102, Operator’S Manual With Illustrated Parts List, Page: 21 / 107

Soft Serve Freezer Model GES-102
184559 11
5 Part Names and Functions
(continued)
The following descriptions apply to figure 4-1. The number preceding the part
name corresponds to the number in the figure.
1.) HEAD:
Encloses the freezing cylinder and
provides an opening for product to be
dispensed. NOTE: Beater motors will not
operate with the head removed from the
freezer.
2.) O-RING - HEAD:
Seals the head to the freezing cylinder.
Must be lubricated.
3.) PLUG - AIR BLEED (BLEEDER ASSY.):
Seals the air bleed opening in the head
when closed. Allows excess air to be
removed from the cylinder when priming.
4.) O-RING - AIR BLEED PLUG:
Seals the air bleed plug in the head.
5.) ROD - SPIGOT :
Starts the freezer when dispensing.
6.) SPIGOT - ASSEMBLY SIDE WITH
HANDLE (Stainless Steel):
Seals the product opening in the head
when closed. Allows product to flow when
open.
7.) O-RING - SPIGOT:
Seals the spigot in the head. Must be
lubricated to seal and slide properly.
8.) O-RING - SPIGOT EXTENSION
:
Holds the extension on to the spigot.
9.) KNOB - HAND:
Secures the head to the freezing cylinder.
10.) EXTENSION - SPIGOT (Accessory)
:
Extends the product opening down to
shape the product as it is dispensed.